Product ID:EA 9320 N PART B (AB0120-078TYPEVIICL1)
MSDS Date:02/09/1990
FSC:8040
NIIN:01-132-0687
Kit Part:Y
MSDS Number: BJDPC

Emergency Phone: 800-424-9300

Info Phone: 415-687-4201

Cage: 0KZ46

Telephone: 800-669-0053

Cage: 0KZ46

ALKYLAMINES

TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: <18%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE CORROSIVE TO SKIN AND EYES.
HIGH CONCENTRATION OF VAPORS CAN CAUSE SEVERE IRRIT OF EYES AND
RESP TRACT. LIQ CAUSES SEVERE DAMAGE TO MUCOUS MEMBRANES IF
SWALLOWED. PROLONGED AND REPEATED CONTACT MAY CAUSE SENSITIZATION
WHICH WILL RESULT IN ALLERGIC REACTIONS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:POSSIBLE BURNS TO EYES AND SKIN; IRRITATION AND
POSSIBLE SENSITIZATION TO SKIN. VAPORS MAY BE IRRITATING TO UPPER
RESP TRACT.

First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH
THOROUGHLY WITH SOAP AND WATER OR HAND CLEANER. DO NOT USE
SOLVENTS. REMOVE SOILED CLOTHING AND WASH BEFORE REUSE. IF
IRRITATION PERSISTS, SEE PHY SICIAN.

Flash Point Method:TOC
Flash Point:>300F,>149C
Extinguishing Media:DRY CHEMICAL OR HALON, WATER SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS. STORE AT ROOM TEMPERATURE (77 F) NO LONGER THAN 12
MONTHS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE. MAY BE CURED FOR
5-7 DAYS @ >77F TO ACHIEVE NORMAL PERFORMANCE. ACCELERATED CURES UP
TO 200F (SMALL MASSES ONLY) MAY BE USED AS AN ALTERNATIVE.

Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST IS RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY W/SOAP & WATER AFTER HANDLING.
EMPTY CONTRS RETAIN PRODUCT RESIDUE & VAPORS, OBEY ALL PRECAUTIONS.
Supplemental Safety and Health
THIS PRODUCT REQ MIXING TWO COMPONENTS TOGETHER JUST PRIOR TO
APPL.COMPLETE MIXING IS NEC.TEMP OF SEPARATE COMPONENTS PRIOR TO
MIXING SHOULD BE CLOSE TO ROOM TEMP.MIX RATIO BY WEIGHT:PART
A-100,PART B -19.POT LIFE (200 GM MASS)=25 MIN.DENATURED
ALCOHOL&MANY COMMON INDUST SOLVENTS WILL REMOVE UNCURED ADHESIVE.

Vapor Density:8.45
Spec Gravity:1.02
Evaporation Rate & Reference:NIL
Appearance and Odor:BLUE LIQUID WITH AMMONIACAL ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NO*X, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN&CURING AGT IN
BATCHES >1/2LB TOT.DO NOT HEAT MIXED ADHESIVE >75F UNLESS CURING
SURFACES TO BE BONDED.

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.